Kebul ɗin fiber optic na ƙarewa ya ƙunshi haɗa masu haɗawa zuwa ƙarshen kebul ɗin don ba su damar haɗawa da wasu kayan aikin fiber optic. Ga jagorar mataki-mataki don dakatar da kebul ɗin fiber optic:

Kayan Aiki da Kayan Aiki da ake buƙata

Haɗin fiber na gani (misali, SC, LC, ST, da sauransu)

Kebul na fiber na gani (yanayi ɗaya ko yanayi da yawa)

Mai yanke fiber na gani

na'urar cire zare ta gani (fiber optic stripper)

Kayan aikin yin kumfa (idan an buƙata ta nau'in mahaɗin)

Fim ɗin gogewa (irin nau'ikan gyada iri-iri)

Man shafawa na Epoxy ko anaerobic (idan an buƙata ta nau'in mahaɗin)

Murhun murhu mai warkarwa (idan ana amfani da epoxy wanda ke buƙatar warkarwa)

Kayan tsaftacewa (isopropyl alcohol, goge-goge marasa lint)

Mai gano lahani na gani (VFL) ko kuma tsarin duba fiber optic

Tsarin Karewa Mataki-mataki

Shirya Kebul ɗin

Auna kuma a yanke kebul na fiber optic zuwa tsawon da ake so.

Cire jaket ɗin waje na kebul ɗin a hankali, ta hanyar fallasa zare na ciki.

Cire duk wani abu mai kariya, kamar Kevlar, don bayyana zare marasa komai. Yi amfani da kayan aikin da suka dace don guje wa lalata zare.

Cire zare ɗin

Ta amfani da na'urar cire murfin fiber optic, cire murfin daga zaren da kanta. Yawanci, za ku cire kusan inci 1-1.5 (25-38mm) na murfin.

Yi hankali don guje wa karya zare mai laushi.

Tsaftace Zaren

Tsaftace zare mara launi da isopropyl alcohol da kuma goge mara lint don cire duk wani saura ko ƙura.

Tabbatar cewa zare yana da tsafta gaba ɗaya don guje wa duk wani gurɓatawa yayin aikin ƙarewa.

Rage Zaren

Yi amfani da na'urar yanke zare don yanke zare daidai. Ya kamata yanke zare ya kasance mai santsi kuma a kusurwar da ta dace da zaren.

Shirya Mai Haɗawa

Idan ana amfani da epoxy, a saka manne a cikin ferrule ɗin mahaɗin.

Saka zare da aka raba a cikin mahaɗin har sai ya taɓa bayan ferrule.

Idan kana amfani da manne da ke buƙatar gogewa, sanya mahaɗin a cikin tanda mai gogewa kamar yadda aka umarce ka da ka yi amfani da shi.

Matse Connector (idan ya dace)

Wasu masu haɗawa suna buƙatar yin ƙugiya. Yi amfani da kayan aikin ƙugiya da ya dace don ɗaure mahaɗin da zare.

Tabbatar cewa maƙallin ya yi ƙarfi amma ba ya matse sosai har ya lalata zaren.

Goge Mai Haɗi

Da zarar manne ya warke, sai a goge ƙarshen mahaɗin ta amfani da fim ɗin gogewa.

Fara da ɗan ƙaramin grit sannan a ci gaba da ƙara masa ɗan ƙaramin grit. A goge shi da tsari mai siffar siffa ta takwas don tabbatar da cewa ya yi santsi.

Duba ƙarshen haɗin da aka goge da na'urar duba fiber optic don tabbatar da cewa babu ƙage ko lahani a ciki.

Gwada Haɗin

Yi amfani da na'urar gano lahani ta gani (VFL) ko wasu kayan aikin gwaji don duba ingancin ƙarshen aikin.

Tabbatar babu asara ko tunani mai yawa a mahaɗin.

Nasihu don Samun Nasara a Katse Kebul ɗin Fiber Optic

Koyaushe a bi umarnin masana'antar haɗin haɗin sosai.

Yi aiki a cikin muhalli mai tsafta don rage gurɓatawa.

Riƙe zare da kyau domin guje wa lalacewa.

A kullum a duba da tsaftace kayan aikinka domin tabbatar da cewa suna cikin koshin lafiya.

Ta hanyar bin waɗannan matakan, za ku iya dakatar da kebul na fiber optic yadda ya kamata kuma ku tabbatar da haɗin gwiwa mai inganci da inganci.