I-G.652.D Plus Ilahleko Ephantsi yeFayibha yeMowudi enye

Iifayibha ezibonakalayoNgokusisiseko zenziwe ngeengqimba ezimbini ze-coaxial: umbindi kunye ne-cladding. Umbindi yinxalenye engaphakathi yefayibha, ekhokela ukukhanya, ngelixa i-cladding iyijikeleze ngokupheleleyo.

I-Feiboer Plus Low Low Single-mode Fibre yenzelwe ngokukodwa iinkqubo zothumelo lwe-optical* ezisebenza kuyo yonke ifestile ye-wavelength ukusuka kwi-1260 nm ukuya kwi-1625 nm. Ngokucinezela incochoyi yamanzi eyenzeka kufutshane ne-1383 nm kwi-fiber ye-single mode eqhelekileyo ngenxa yokufunxwa kwee-ion ze-hydroxyl (OH-), i-GL FIBER© Plus Fibre iyakwazi ukuvula i-E-band (1360 ukuya kwi-1460nm) ukuze isebenze, kwaye ngenxa yoko ibonelela ngamaza okukhanya asebenziseka ngakumbi angama-100 nm. I-GL FIBER® Plus Fibre ilungiselelwe ngokufanelekileyo inqanaba eliphantsi kakhulu lokunciphisa umbane kuyo yonke ifestile ye-wavelength ukusuka kwi-1260 nm ukuya kwi-1625 nm.

Ngenxa ye-spectrum yayo ebanzi esebenzisekayo kunye nokusebenza kwayo okugqwesileyo kokunciphisa, i-Feiboer Plus Low Loss Single-mode Fibre yeyona ndlela ifanelekileyo exhasa usetyenziso oluhlukeneyo olufana ne-Ethernet, i-Internet Protocol (IP), i-Asychronous Transfer Mode (ATM), i-Synchronous Distribution Network (SDH) kunye ne-Wavelength Division Multiplexing (WDM). I-Feiboer Plus Low Loss Singlemode Fibre inika i-bandwidth ebanzi kunye nokunciphisa isignali okuphantsi kakhulu kwi-backbone, i-metropolitan area kunye neenethiwekhi zokufikelela.

• Yenzelwe ukusebenza kwi-spectrum epheleleyo ye-optical ukusuka kwi-1260-1625 nm, kwaye ngenxa yoko amandla okudlulisela ayanda.
• Ukuncitshiswa okuphantsi kakhulu kwi-spectrum epheleleyo ye-optical ukusuka kwi-1260 nm ukuya kwi-1625 nm, nto leyo ehlangabezana neemfuno zokudluliselwa komgama omde.
• Ukusebenza okugqwesileyo kwe-optical okuxhasa ubuchwepheshe bokudlulisa ngesantya esiphezulu obufana ne-DWDM kunye ne-CWDM
• Ukuhambelana nezixhobo ezikhoyo ze-1310 nm
• Ukhuseleko olufanelekileyo kunye nokuzinza okugqwesileyo kwamandla okutsalwa kwemigca
• Iiparameter zejometri ezichanekileyo eziqinisekisa ukulahleka okuphantsi kokudityaniswa kunye nokusebenza kakuhle kokudityaniswa

Ukuba ufuna ulwazi oluthe kratya okanye inkxaso kwiimveliso ze-fiber optical ezivela kumthengisi wekhebula le-FTTH othembekileyo, nceda ungathandabuzi ukuqhagamshelana nathi. info@feiboer.com.cn, siza kuzama konke okusemandleni ethu ukukuxhasa.

Qhagamshelana nathi

Qaphela: Olu xwebhu lwedatha lunokuba yireferensi kuphela, kodwa aluyonto eyongezelelweyo kwisivumelwano. Nceda unxibelelane nabathengisi bethu ukuze ufumane ulwazi oluthe kratya.

I-cable core isebenzisa i-coating fiber enemibala engama-250μm.

Isicelo:

Ngenxa yokusebenza kwayo okugqwesileyo kokuncitshiswa kunye nokugoba, iFeiboer Low Loss Bending Insensitive Single-mode Fibre ihambelana ngokupheleleyo neenkqubo ezahlukeneyo zekhebula kunye neenkqubo ezahlukeneyo kwiindawo ezahlukeneyo zokufakela zenethiwekhi ye-trunk, inethiwekhi yendawo yedolophu, inethiwekhi yokufikelela kunye nenethiwekhi yabahlali.

Iimpawu		Iimeko	Amaxabiso athile	Iiyunithi
Iimpawu zoBuchule
Ukunciphisa		1310nm	≤0.32	[dB/km]
		1383nm (emva kwe-H₂-ukwaluphala)	≤0.31	[dB/km]
		1550nm	≤0.18	[dB/km]
		1625nm	≤0.20	[dB/km]
Ukunciphisa umlinganiselo xa kuthelekiswa nobude begagasi Umahluko omkhulu we-α		1285-1330nm, ngokubhekiselele kwi-1310nm	≤0.03	[dB/km]
		1525-1575nm, ngokubhekiselele kwi-1550nm	≤0.02	[dB/km]
Ubudlelwane bokusasazeka buxhomekeke kwizakhono zobuchule		1285-1340nm	-3.5 ukuya kwi-3.5	[ps/(nm·km)]
		1550nm	≤18	[ps/(nm·km)]
		1625nm	≤22	[ps/(nm·km)]
Ubude beWavelength yeZero Dispersion(λ₀)		--	1300-1324	[nm]
Ithambeka lokuSasazwa kweZero (S)₀)		--	≤0.092	[ps/(nm)²·km)]
Ixabiso eliqhelekileyo		--	0.086	[ps/(nm)²·km)]
I-PMD	I-Fiber yoMntu ngamnye ephezulu	--	≤0.1	[ps/√km]
	Ixabiso loYilo lweKhonkco (M=20, Q=0.01%)	--	≤0.06	[ps/√km]
	Ixabiso eliqhelekileyo	--	0.04	[ps/√km]
Ubude beWavelength yeCable Cutoff (λ)_I-CC)		--	≤1260	[nm]
Ububanzi beNdawo yeMode（MFD）		1310nm	8.7-9.5	[μm]
Ububanzi beNdawo yeMode（MFD）		1550nm	9.8-10.8	[μm]
Isalathisi seQela eliSebenzayo leRefraction (N)_i-eff）		1310nm	1.466	--
Isalathisi seQela eliSebenzayo leRefraction (N)_i-eff）		1550nm	1.467	--
Ukungahambelani kwamanqaku		1310nm	≤0.05	[dB]
Ukungahambelani kwamanqaku		1550nm	≤0.05	[dB]
Iimpawu zeJiyometriki
Ububanzi be-Cladding		--	125.0±0.7	[μm]
Ukungajikelezi kweClodding		--	≤1.0	[%]
Ububanzi bokugquma		--	235-245	[μm]
Impazamo yokuGqibezela-ukuGqibezela		--	≤12.0	[μm]
Ukugquma okungajikeleziyo		--	≤6.0	[%]
Impazamo ye-Core-Cladding Concentricity		--	≤0.6	[μm]
I-curl (irediyasi)		--	≥4	[m]
Ubude bokuhanjiswa		--	Ukuya kuthi ga kwi-50.4	[km/reel]
Iimpawu zeNdalo		1310nm, 1550nm kunye ne-1625nm
Ukuxhomekeka kobushushu okubangelwa kukunciphisa ubushushu		-60℃ ukuya ku +85℃	≤0.05	[dB/km]
Ukunciphisa Ubushushu-Umswakama Obangelwa Kukujikeleza		-10°C ukuya ku +85°C, 98% RH	≤0.05	[dB/km]
Ukuxhomekeka kwiWatersoak okubangelwa kukunciphisa amandla		23°C, kangangeentsuku ezingama-30	≤0.05	[dB/km]
Ukuxhomekeka kobushushu okufumileyo okubangelwa kukunciphisa amandla		85°C kunye ne-85% RH, kangangeentsuku ezingama-30	≤0.05	[dB/km]
Ukuguga Kobushushu Obomileyo		85℃, kangangeentsuku ezingama-30	≤0.05	[dB/km]
Iinkcukacha zoomatshini
Uvavanyo loBungqina		--	≥9.0	[N]
		--	≥1.0	[%]
		--	≥100	[kpsi]
Ukuncitshiswa Okubangelwa YiMacro-bend	Ii-100 zijika iMandrel eyi-30 mm Radius	1625nm	≤0.05	[dB]
	Ii-100 zijika iMandrel engama-25 mm Radius	1310nm kunye ne-1550nm	≤0.05	[dB]
	1 Jikelezisa iMandrel eyi-16 mm Radius	1550nm	≤0.05	[dB]
Ukwaleka Strip Force		amandla aqhelekileyo aqhelekileyo	1.5	[N]
Ukwaleka Strip Force		amandla aphezulu	1.3-8.9	[N]
Ipharamitha yokudinwa okuDynamic (n)_d)		--	≥20	--

Thetha neqela lethu namhlanje

Siyazingca ngokubonelela ngeenkonzo eziluncedo ngexesha elifanelekileyo, ezinokuthenjwa nezithembekileyo

ubuze ngoku