Structure Innovation in sheath, air blown micro fiber enhancing the blowing performance.

Particular technique control, fiber air blow prevent sheath form crinkling during installation.

Accurate fibre length balance, stable mechanical and temperature performance.

Product Overview

Feiboer has been devoted to developing and producing the fiber air blow. So far, we have produced various air blown cable types, in that, the optic cable air blown and the air blown micro fiber optic cable are the main products.

Product Advantages

Structure Innovation in sheath, enhancing the blowing performance.

Particular technique control, prevent sheath form crinkling during installation.

Accurate fibre length balance, stable mechanical and temperature performance.

Special complex material loose tube, reduce the shrink of tube in cold temperature.

Standards

Unless otherwise specified in this specification, all requirements shall be mainly in accordance with the following standard specifications.

Optical fibre ....ITU-T G.652D、G657、IEC 60793-2-50

Optical cable....IEC 60794-5.IEC 60794-1-2

This blown fiber optic cable is a stranded non metallic reinforcement and non armored air blown micro cable. It can be pulled or air blown in the laid outer protective tube, and then air blown the micro cable in the micro tube.

Description

Feiboer GCYFY is a blown fiber optic cable which is non metallic, non armored and strand loose tube structure. It’s easy to bend when laying by air blown becuase of it’s small diameter, light weight and moderate hardness.

This cable is suitable for construction in crowded metropolitan area network pipelines, and avoiding destructive excavation in the past.

Application

Backbone network, Metropolitan area network, Access network

Features

Low friction coefficient sheath design and materials assures long air blowing distance

All non metallic structure, so there is no requirements for grounding

Easy to bend, laying and operate with small diameter, light weight

Make full use of pipelines resources, fast construction of air blowing laying method

Save costs for splicing joint and distribution management

This microduct fiber cable is a unitube non metallic cable. It can be pulled or air blown in the existing micro tube, which improves pipeline efficiency.

Description

Feiboer GCXFY is a central unitube microduct fiber air blown cable. Optical fibers are placed in a high modulus loose tube. Tube filling compound is filled in the central tube to protect fibers. In addition, a layer of aramid yarn is surrounding the unitube as the strength member.

Air blown micro fiber cable enables to cut ducts anywhere and any time for distribution, and without influence on other cable in the same time. As results, it saves lots of costs on construction and splicing joints. To sum up, this cable is usually used in air blowing constructions in access network.

Application

FTTH networks, Metropolitan area networks and Backbone networks

Features

Connects distribution branch and end user’s access point

Blow out to replace with new cable is easy to operate

Small diameter and light weight provides good air blowing performance

Save costs in construction and splicing equipment

Blowing by phases laying method reduces initial investment costs

Tube filling compound and aramid yarn provides excellent protection for optical fibers

This enhanced performance fiber unit air blown fiber is having the 2-12 core single mode optical fibers in the middle of resin materials for UV curing. And outside extruding a special low friction sheath.

Description

Feiboer EPFU (enhanced performance fiber unit) is a air blown fiber optic cable unit. It’s used in end user’s network with a handheld air cable blower from fiber distribution point on the road to households.

Fiber bundle of this cable is formed by curing optical fiber or fillers into photosensitive resin in a certain arrangement. And outside extruding a special low friction sheath.

Application

FTTH access cable between distribution point and end user’s multimedia information box

Features

Small size, light weight

Easy to install with handheld cable air blowing machine

Compatible with industry standard air blowing equipment

G.657A2 fiber with small bending radius, suitable for indoor wiring application

Low friction and resin sheath ensures good air blowing performance